Authorised office equipment supplier · Klang Valley, Malaysia

TallyDascom · Dot-Matrix Printer

TallyDascom 1330 Flatbed Dot Matrix Printer

In stock

RM1,290.00

  • 24-pin flatbed impact printer; up to 82 columns at 10 cpi
  • Draft: 300 cps at 10 cpi; 450 cps at 15 cpi
  • Up to 7-part forms: 1 original + 6 copies
  • USB standard; other interfaces optional
  • Cut sheets and continuous forms; confirm your media
Ask about this on WhatsApp
logo tallydascom 768x768
  • Serviced in-house in Puchong — no overseas repairs
  • Business invoicing & bulk pricing available

Description

TallyDascom 1330 flatbed dot-matrix printer

A compact 24-pin impact printer for front-desk paperwork, individual cut sheets and multipart continuous forms.

The Tally Dascom 1330 combines front-loading flatbed handling with a push tractor for recurring business forms. It suits invoices, receipts, delivery documents and supported cheques where accurate alignment and carbon-copy output matter. Its 395 × 320 × 205 mm dimensions and approximately 4.2 kg product weight help when planning a counter or office workstation.

Enquire with WOW Supplies in Puchong, Selangor, Malaysia about the Tally Dascom 1330 for your office, accounts department or service counter. Share a sample form, copy requirement, operating system and connection type so the model configuration and quoted package can be checked.

Features

  • Flexible paper handling: Load individual forms through the flatbed friction-feed path, or use the push tractor for continuous forms. Choose paper within the documented dimensions and thickness limits.
  • Seven-part document capability: Print one original with up to six copies using suitable multipart forms. Adjust the head-gap lever for your media.
  • Print speed with the mode stated: Draft mode delivers 300 cps at 10 cpi, 360 cps at 12 cpi and 450 cps at 15 cpi. Condensed 20 cpi draft is listed at 600 cps in the May 2026 manual; it uses smaller characters. Letter-quality output runs at a lower speed.
  • Accurate positioning: DASCOM describes a linear encoder sensor that tracks printhead position and helps correct carriage-position errors. Correct form setup and alignment remain essential.
  • Standard USB connection: USB 2.0 connects the standard unit to a workstation. Optional interfaces must be specified separately; network connectivity is not standard.
  • Replaceable ribbon: The May 2026 manual rates the black ribbon at 9 million characters in Draft / 10 cpi. Actual yield depends on the cartridge, print mode and use.
  • Forms and legacy applications: Epson ESC/P2 and IBM 2390+ emulations are documented. Check the printer driver, application settings and a sample print for your installation.

Specifications

Printing method 24-pin serial impact dot matrix
Print width 80 or 82 columns at 10 cpi, selected by the print-width setting; maximum 8.2-inch print line
Print speed Draft: 300 / 360 / 450 cps at 10 / 12 / 15 cpi; NLQ: 200 / 240 / 300 cps; LQ: 100 / 120 / 150 cps at the same pitches
Multipart capability Up to 7-part forms: 1 original + 6 copies
Paper handling Front-loading friction feed for cut sheets; push tractor for continuous forms
Standard interface USB 2.0
Optional interfaces Parallel, serial, Ethernet, Wi-Fi and Bluetooth; configuration and availability must be confirmed
Resolution Up to 360 × 360 dpi
Product dimensions 395 × 320 × 205 mm (W × D × H)
Product weight 4.2 kg product weight; shipping weight is listed separately

Open Additional Information for the complete specifications, including print-mode speeds, media limits, ribbon, drivers, electrical ratings and warranty details.

Paper, connectivity and ordering guidance

Paper width is not printable width: the printer accepts cut sheets up to 297 mm wide, while the maximum print line is 8.2 inches. Use the 80- or 82-column setting at 10 cpi to match your form layout. This is not a full-width A3 landscape printer.

The May 2026 manual lists cut sheets 55–297 mm wide and 55–559 mm long, continuous forms 55–290 mm wide and 76–559 mm long, and a maximum paper thickness of 1.0 mm. Test the actual form stock and software layout; OCR readers should be tested with print samples before purchase.

Confirm the supplied interface, operating-system driver, power rating, connection cable and warranty terms. Optional interface modules and accessories are separate unless expressly included in the quoted package.

Contact WOW Supplies in Puchong to confirm availability and the appropriate configuration.

Product views and details

TallyDascom 1330 — front view and flatbed paper path
TallyDascom 1330 — front view and flatbed paper path
TallyDascom 1330 — angled view of the paper guide and housing
TallyDascom 1330 — angled view of the paper guide and housing
TallyDascom 1330 — opposite angled view and side housing
TallyDascom 1330 — opposite angled view and side housing

Frequently asked questions

How many copies can the TallyDascom 1330 print?

The 1330 supports up to seven-part forms: one original and six copies. Use compatible paper within the documented width and thickness limits and set the head-gap lever correctly.

Does the TallyDascom 1330 include Ethernet or Wi-Fi?

USB is the standard interface. Parallel, serial, Ethernet, Wi-Fi and Bluetooth are optional configurations or interfaces. Confirm the required connection and supplied package before ordering.

Can the 1330 print across the full width of A3 paper?

No. It accepts cut sheets up to 297 mm wide, but its maximum print line is 8.2 inches, or 82 columns at 10 cpi. The 80-column setting is also available. Check the printable area, margins and form layout separately from paper width.

Is the 1330 suitable for invoices, cheques and continuous forms?

Its flatbed friction feed and push tractor support cut sheets and continuous forms. The manual also lists cheques, cards, envelopes and labels, subject to media limits. Test your form, software layout and OCR reader where relevant before purchase.

Where can I enquire about the TallyDascom 1330 in Malaysia?

Contact WOW Supplies in Puchong, Selangor, Malaysia. Provide your form sample, copy count, operating system and connection requirement so availability, warranty terms and the supplied configuration can be confirmed.

Additional information

Weight 5 kg
Brand

Tally Dascom

Model

1330

Printing Method

24-pin serial impact dot matrix

Print Width

80 or 82 columns at 10 cpi, selected by the print-width setting; maximum 8.2-inch print line

Print Speed

Draft: 300 / 360 / 450 cps at 10 / 12 / 15 cpi; NLQ: 200 / 240 / 300 cps; LQ: 100 / 120 / 150 cps at the same pitches

Multipart Capability

Up to 7-part forms: 1 original + 6 copies

Paper Handling

Front-loading friction feed for cut sheets; push tractor for continuous forms

Standard Interface

USB 2.0

Optional Interfaces

Parallel, serial, Ethernet, Wi-Fi and Bluetooth; configuration and availability must be confirmed

Resolution

Up to 360 × 360 dpi

Product Dimensions

395 × 320 × 205 mm (W × D × H)

Product Weight

4.2 kg product weight; shipping weight is listed separately

Condensed-Mode Speeds

Draft: 510 cps at 17 cpi and 600 cps at 20 cpi; NLQ: 340 / 400 cps; LQ: 170 / 200 cps at the same pitches (May 2026 manual)

Printable Columns by Pitch

At the 8.2-inch width setting: 82 at 10 cpi; 98 at 12 cpi; 123 at 15 cpi; 140 at 17.1 cpi; 164 at 20 cpi

Print Direction

Uni-directional or bi-directional logic seeking for text and graphics; software selectable

Character Pitch

10, 12, 15, 16.6, 17.1, 20 and 24 cpi; proportional spacing

Line Spacing

1/6 inch, 1/8 inch, n/60 inch, n/180 inch or n/360 inch

Printhead Life

400 million strokes per pin; manufacturer rating

Printhead Pin Diameter

0.2 mm

Input Buffer

Up to 256 KB

Emulations

Epson ESC/P2 and IBM 2390+

Fonts

Roman, Sans Serif, Courier, Prestige, Script, OCR-A, OCR-B, Orator, Gothic and Souvenir; draft print modes supported

Barcodes

Earlier DASCOM AP datasheet lists EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128 and POSTNET; confirm barcode and application compatibility

Character Sets

Standard, IBM, OCR-A and OCR-B sets; international character sets selectable

Ribbon Type

Replaceable monochrome black cartridge ribbon

Ribbon Life

9 million characters at Draft / 10 cpi (May 2026 manual); actual yield varies; confirm cartridge configuration

Paper Types

Cut sheets, continuous forms and multipart forms; manual also lists labels, cheques, cards and envelopes subject to media limits

Paper Weight

Manual head-gap table: 52–100 g/m² per ply for 1–2 plies; 40–55 g/m² per ply for 3–7 plies. Earlier datasheets list 52–120 g/m²; test the intended stock and use the correct head-gap setting

Cut-Sheet Media Limits

Width: 55–297 mm; length: 55–559 mm (May 2026 manual)

Continuous-Form Media Limits

Width: 55–290 mm; length: 76–559 mm (May 2026 manual)

Maximum Paper Thickness

1.0 mm; select the appropriate head-gap lever setting

Paper Feed Speed

8 inches per second

Monthly Workload

Up to 6,000 pages per month; manufacturer rating

MTBF

12,000 hours; manufacturer rating

MVBF

24 million lines; manufacturer rating

Power Supply

AC 220–240 V or AC 100–120 V, 50/60 Hz; region-specific unit, confirm the supplied voltage

Power Consumption

Rated: 34 W; sleep mode: 1.4 W (May 2026 manual)

Windows Driver Availability

Windows 7 / 8 / 8.1 / 10 / 11; Windows Server 2008–2016 / 2019 / 2022 listed by the current manufacturer download page; confirm the exact OS and application

Configuration Utility

Tally Dascom printer configuration tool

Operating Temperature

0–45 °C (May 2026 manual); regional datasheets may specify a narrower range

Operating Humidity

10–96% RH, non-condensing (May 2026 manual); regional datasheets may specify a narrower range

Stand-by Temperature

−20 to 55 °C (May 2026 manual)

Stand-by Humidity

5–96% RH, non-condensing (May 2026 manual)

Acoustic Rating

Approximately 57 dB(A) (May 2026 manual); regional ratings differ

Warranty

1 year warranty inclusive of printhead; confirm terms with the quotation

OCR and Media Suitability

Test OCR readers using print samples before purchase. Paper properties vary; test the intended stock and application. Consumable yield is an average under normal operating conditions.

Brand

TallyDascom

TallyDascom makes dot matrix printers for business forms, multi-part documents and continuous stationery. The range available from WOW Supplies covers flatbed and wide-carriage dot matrix printers for printing invoices, delivery orders and other forms.
logo tallydascom 768x768
RM1,290.00 TallyDascom 1330 Flatbed Dot Matrix Printer
Add to cart