Description
TallyDascom 1330 flatbed dot-matrix printer
A compact 24-pin impact printer for front-desk paperwork, individual cut sheets and multipart continuous forms.
The Tally Dascom 1330 combines front-loading flatbed handling with a push tractor for recurring business forms. It suits invoices, receipts, delivery documents and supported cheques where accurate alignment and carbon-copy output matter. Its 395 × 320 × 205 mm dimensions and approximately 4.2 kg product weight help when planning a counter or office workstation.
Enquire with WOW Supplies in Puchong, Selangor, Malaysia about the Tally Dascom 1330 for your office, accounts department or service counter. Share a sample form, copy requirement, operating system and connection type so the model configuration and quoted package can be checked.
Features
- Flexible paper handling: Load individual forms through the flatbed friction-feed path, or use the push tractor for continuous forms. Choose paper within the documented dimensions and thickness limits.
- Seven-part document capability: Print one original with up to six copies using suitable multipart forms. Adjust the head-gap lever for your media.
- Print speed with the mode stated: Draft mode delivers 300 cps at 10 cpi, 360 cps at 12 cpi and 450 cps at 15 cpi. Condensed 20 cpi draft is listed at 600 cps in the May 2026 manual; it uses smaller characters. Letter-quality output runs at a lower speed.
- Accurate positioning: DASCOM describes a linear encoder sensor that tracks printhead position and helps correct carriage-position errors. Correct form setup and alignment remain essential.
- Standard USB connection: USB 2.0 connects the standard unit to a workstation. Optional interfaces must be specified separately; network connectivity is not standard.
- Replaceable ribbon: The May 2026 manual rates the black ribbon at 9 million characters in Draft / 10 cpi. Actual yield depends on the cartridge, print mode and use.
- Forms and legacy applications: Epson ESC/P2 and IBM 2390+ emulations are documented. Check the printer driver, application settings and a sample print for your installation.
Specifications
| Printing method | 24-pin serial impact dot matrix |
|---|---|
| Print width | 80 or 82 columns at 10 cpi, selected by the print-width setting; maximum 8.2-inch print line |
| Print speed | Draft: 300 / 360 / 450 cps at 10 / 12 / 15 cpi; NLQ: 200 / 240 / 300 cps; LQ: 100 / 120 / 150 cps at the same pitches |
| Multipart capability | Up to 7-part forms: 1 original + 6 copies |
| Paper handling | Front-loading friction feed for cut sheets; push tractor for continuous forms |
| Standard interface | USB 2.0 |
| Optional interfaces | Parallel, serial, Ethernet, Wi-Fi and Bluetooth; configuration and availability must be confirmed |
| Resolution | Up to 360 × 360 dpi |
| Product dimensions | 395 × 320 × 205 mm (W × D × H) |
| Product weight | 4.2 kg product weight; shipping weight is listed separately |
Open Additional Information for the complete specifications, including print-mode speeds, media limits, ribbon, drivers, electrical ratings and warranty details.
Paper, connectivity and ordering guidance
Paper width is not printable width: the printer accepts cut sheets up to 297 mm wide, while the maximum print line is 8.2 inches. Use the 80- or 82-column setting at 10 cpi to match your form layout. This is not a full-width A3 landscape printer.
The May 2026 manual lists cut sheets 55–297 mm wide and 55–559 mm long, continuous forms 55–290 mm wide and 76–559 mm long, and a maximum paper thickness of 1.0 mm. Test the actual form stock and software layout; OCR readers should be tested with print samples before purchase.
Confirm the supplied interface, operating-system driver, power rating, connection cable and warranty terms. Optional interface modules and accessories are separate unless expressly included in the quoted package.
Contact WOW Supplies in Puchong to confirm availability and the appropriate configuration.
Product views and details



Frequently asked questions
How many copies can the TallyDascom 1330 print?
The 1330 supports up to seven-part forms: one original and six copies. Use compatible paper within the documented width and thickness limits and set the head-gap lever correctly.
Does the TallyDascom 1330 include Ethernet or Wi-Fi?
USB is the standard interface. Parallel, serial, Ethernet, Wi-Fi and Bluetooth are optional configurations or interfaces. Confirm the required connection and supplied package before ordering.
Can the 1330 print across the full width of A3 paper?
No. It accepts cut sheets up to 297 mm wide, but its maximum print line is 8.2 inches, or 82 columns at 10 cpi. The 80-column setting is also available. Check the printable area, margins and form layout separately from paper width.
Is the 1330 suitable for invoices, cheques and continuous forms?
Its flatbed friction feed and push tractor support cut sheets and continuous forms. The manual also lists cheques, cards, envelopes and labels, subject to media limits. Test your form, software layout and OCR reader where relevant before purchase.
Where can I enquire about the TallyDascom 1330 in Malaysia?
Contact WOW Supplies in Puchong, Selangor, Malaysia. Provide your form sample, copy count, operating system and connection requirement so availability, warranty terms and the supplied configuration can be confirmed.

