Description
TallyDascom 2600+ dot-matrix printer
An 80-column, 24-pin impact printer with a 203.2 mm (8-inch) print line for compact office forms, invoices and transaction records. Standard wired Ethernet, USB and parallel connections support shared and workstation printing.
The Tally Dascom 2600+ handles individual cut sheets and continuous forms through an accessible front-loading paper path. It is designed for invoices, delivery notes, transaction records and reports that require impact printing, with up to one original and five copies on supported multipart forms.
Enquire with WOW Supplies in Puchong, Selangor, Malaysia about your form width, copy requirement, operating system and preferred connection. These details help identify the correct printer configuration and quoted package.
Features
- Width for your forms: 80 columns at 10 cpi gives a maximum print line of 203.2 mm (8 inches). Match the printable area and margins to your actual business form.
- Speed with mode and pitch stated: High-speed draft runs at 600 cps at 10 cpi and 683 cps at 12 cpi. Standard draft and letter-quality modes have different speeds; select quality appropriate to the document.
- Built-in wired networking: Ethernet 10/100 with IPv6 support is standard, alongside USB and bi-directional parallel. A USB-A host port is provided for firmware and configuration files.
- Six-part forms: Print one original and up to five copies using compatible multipart media within the 0.50 mm form-thickness limit.
- Front-access paper handling: Insert individual sheets at the front or arrange the standard tractor for the required continuous-form path. Confirm extra tractor accessories separately.
- Backlit controls: The two-line LCD and six-key control panel provide access to settings and paper-feed functions.
- Replaceable long-life ribbon: The monochrome cartridge is rated for approximately 10 million characters in Draft / 10 cpi, rolling ASCII. Yield depends on actual printing. Optional accessories and regional ratings should be checked with the supplied package.
Specifications
| Printing method | 24-pin serial impact dot matrix |
|---|---|
| Print width | 80 columns at 10 cpi; maximum print line 203.2 mm (8 inches) |
| High-speed draft | 600 cps at 10 cpi; 683 cps at 12 cpi and standard 15 cpi |
| Multipart capability | Up to 6-part forms: 1 original + 5 copies |
| Standard interfaces | USB 2.0, bi-directional parallel, wired Ethernet 10/100 with IPv6 support; USB-A host for firmware and configuration files |
| Resolution | Up to 360 × 360 dpi |
| Paper handling | Front insertion for cut sheets; continuous forms via a tractor positioned at front, rear or top/pull, according to setup |
| Ribbon life | Approx. 10 million characters in Draft / 10 cpi, rolling ASCII; actual yield varies |
Open Additional Information for the full print-mode speeds, paper limits, electrical ratings, dimensions and interface details.
Paper, connectivity and ordering guidance
Paper width and printable width are different. The 2600+ has an 80-column line at 10 cpi; it is not designed to print to every edge of the widest sheet it accepts. The manual lists cut sheets 76–278 mm wide and 148–420 mm long; continuous forms 76.2–278 mm wide and 76.2–559 mm long.
For multipart forms, use an original sheet of 45–65 g/m² and copy sheets of 45–56 g/m² within the maximum 0.50 mm total thickness. Check print-gap settings and test the actual form, margins and application before purchase.
Confirm warranty terms and coverage in Malaysia, supplied tractor configuration, connection cable and driver with the quotation. The manual and manufacturer datasheets differ on dimensions, workload, reliability and environmental ratings. Media lengths also differ: the general datasheet lists 76–599 mm, while this description uses the manual’s paper-specific limits. Additional Information qualifies the source-dependent figures; confirm the actual supplied unit and form before ordering.
Contact WOW Supplies in Puchong for availability and configuration advice.
Product views and details
Frequently asked questions
How many copies can the TallyDascom 2600+ print?
The TallyDascom 2600+ prints up to six-part forms: one original and five copies. Use supported media within the documented paper weights and maximum 0.50 mm form thickness.
Does the TallyDascom 2600+ include Ethernet?
The TallyDascom 2600+ includes wired Ethernet 10/100 with IPv6 support, USB 2.0 and parallel as standard. The USB-A host port handles firmware and configuration files. Serial RS-232 is optional.
What is the difference between the 2600+ and 2610+?
The 2600+ prints 80 columns at 10 cpi; the 2610+ prints 136 columns at 10 cpi for wider forms. Their maximum print lines are 203.2 mm and 345.44 mm respectively. Match the print line and paper path to your actual form.
Is a second tractor included with the TallyDascom 2600+?
The current manufacturer datasheet lists one standard tractor configurable for front/rear push or top pull, and an additional rear push tractor as optional. Confirm the supplied regional package before ordering.
Where can I enquire about the TallyDascom 2600+ in Malaysia?
Contact WOW Supplies in Puchong, Selangor, Malaysia. Provide your form sample, required copies, operating system and connection type to confirm availability, warranty and configuration.
